Categories
- Parts by Make and Model
- Axles
- Air Filters
- Batteries
- Battery Chargers
- Bearings
- Belts
- Brakes
- Brake Levers
- Cables
- Carburetors
- Chain
- Circuit Breakers
- Clutches
- Connectors
- Controllers
- Exhaust
- Fuel Filters
- Fuel Tanks and Caps
- Fuses and Fuse Holders
- Gaskets
- Hardware
- Helmets
- Horns
- Ignition Coils
- Intake Manifolds
- Key Switches
- Lights and Lenses
- Motors (Electric)
- Miscellaneous Parts
- Pull Starters and Pawls
- Rims
- Seats
- Sprockets
- Starters
- Suspension
- Switches
- Throttles
- Tires and Tubes
- Transmissions
- Wheel Assemblies
- Wire
48 Volt Conversion Controller for Razor MX500 and MX650 Dirt Bikes with 5-Wire Throttle (Model: MX4830-5)
Part Number: CTL-101213This 48 volt controller module is a upgrade to the following models of Razor Dirt Rocket bikes:
MX500 Dirt Rocket, versions 10 and subsequent.
MX650 Dirt Rocket, versions 8 and subsequent.
Model versions can be determined based on the product ID code on your Razor product. The product ID code can be found on the battery cover and/or on the bottom of the frame. The 7th and 8th numbers in your product ID code are the version number of your Razor product (e.g. "01" = Version 1, "02" = Version 2, etc.).
This controller requires changing the original 36 Volt battery pack to a 48 Volt battery pack. This is a popular modification with Razor Dirt Quad owners who want to increase the speed and power of their dirt bikes.
The controller is compatible with models that have a 5-wire throttle.
This control module is NOT compatible with older models with a 4-wire throttle.
The controller has 6 connectors.
- Rated Voltage 48 Volts.
- Minimum Operating Voltage 41.0 Volts.
- Max Current 30 Amps.
- Usable Motors: &le 1000 Watts.
Product Specifications Sheet:
MX4830-5 Controller Specifications |
|
Not Available | |
Not Available |
NOTE:
Due to the delicate nature of voltage and speed controllers, and the care that must be taken when making connections, it is the TNC Scooters company policy that all voltage and speed controller sales are final. Please ensure you are comfortable making delicate wiring connections prior to ordering. Our entire return policy can be viewed at the link below:
TNC Scooters Return Policy
- Availability: Out of Stock
- Part Number: CTL-101213