This disk brake caliper fits many gas scooters, electric scooters and pocket bikes models.

Adjustment knob for proper disk alignment.

Designed for use with 120mm, 140mm and 160mm disk brake rotors.

120mm disk brake rotor with 3 hole mounting pattern.
Direction indicator arrow on surface of rotor.

Specifications

Outer Diameter: 120mm
Inner Diameter: 26mm
Thickness: 3mm
Bolt hole spacing: 33mm

Specifications

8mm (T8F) Master Link

Dimensions

Pin Spacing: 8mm / 5/16 inch
Width Between Rollers: 0.128 inches

Specifications

Chain is 13'' long folded in half.
8mm chain has a 5/16'' spacing between each link.

Specifications

410 Master Link 1/2 x 1/8 inch
This master link is for single speed bicycle chain.

Dimensions

Pin Spacing: 9.4mm / 0.37 inchs

Specifications

420 Master Link

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 7.7mm / 0.30 inches

Specifications

Chain is 22-1/2 inches long folded in half.
Includes one master link.

420 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 7.7mm / 0.30 inches

Specifications

428 Master Link

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 16 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 17.5 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 24 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch

Exhaust Gasket for 43cc and 49cc 2-stroke engines. Mounts between exhaust and engine.

Specifications

Bolt hole spacing: 40mm

Aluminum brake lever with built-in return spring.
High-profile design reaches over handle bar grips and controls.
Fits standard 7/8" (22 mm) handle bars.

This is a kill switch for a mini pocket bike.

This twist throttle fits most Chinese made gas scooters.
Fits standard 7/8'' OD handlebars and cable is approximately 40'' long with two push-on connectors.

This 12 volt charger has a multi-color LED indicator glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60Hz
Output Voltage: 12 Volt, 1.0 Amp
Connector: 3 Prong INLINE (female) plug

Key switch with 4 wires and keys.
Key removable in off position only.

These foot pegs fits most Chinese made 47cc and 49cc Mini Pocket Bikes.
Includes one left and one right foot peg with mounting screws.

This smoke color windshield fits most Chinese made 47cc and 49cc Mini Pocket Bikes.

This is a (clear) rear tail light assembly for a super pocket bike.

This is the gas tank for a 47cc pocket bike.

Specifications

This gas tank fits most 47cc and 49cc Half Fairing Mini Pocket Bikes.

Dimensions

Length: 5-1/2 inches
Width: 4 inches
Height: 3 inches
Capacity: 0.29 Gallon

This is the front tire for a 47cc pocket bike.
Size 90 / 65 - 6.5 (Street Slick)

This is the rear tire for a 47cc pocket bike.
Size 110 / 50 - 6.5 (Street Slick)

This is the front tire for a super pocket bike.
Size 13 x 5 x 6 NOTE: This is a tubeless tire.

This is the rear tire for a super pocket bike.
Size 13 x 6.5 x 6 NOTE: This is a tubeless tire.

This is the front rim for a 47cc pocket bike.

This is the rear rim for a 47cc pocket bike.

Replacement clutch / freewheel works on all Pocket Bikes with threaded wheel hubs.

Dimensions:

Outer Diameter: 3 inches
Inner Diameter: 1-3/8 inches

This is a 44 tooth sprocket for a super pocket bike. This sprocket fits most X1, X2, and CatEye Pocket Bikes.

This black padded seat fits most Chinese made super pocket bikes.
NOTE: Mounting screws are NOT included.

This is the rear (mono) shock for the super pocket bike.

43cc and 49cc 2-stroke intake manifold.

Specifications

Bolt Spacing Engine Side: 38mm
Bolt Spacing Carburetor Side: 31mm

13 mm carburetor for use on 47cc and 49cc 2-stroke gas engines.

Specifications

Venturi Opening: 13mm
Bolt Hole Spacing: 38mm

Features

Built in Manual Choke

47cc and 49cc 2-stroke intake manifold.

Specifications

Bolt Hole Spacing Engine Side: 42mm
Bolt Hole Spacing Carburetor Side: 38mm

This pull starter fits all 33cc, 36cc, 43cc, and 49cc 2-stroke engines.

Specifications

Spacing between bolts holes: 2-5/8'' / 67mm
Diagonal bolt hole spacing: 3-3/4'' / 95mm

This pull starter fits all 43cc and 49cc 2-stroke engines.
Click here Starter Claw / Pawl for Type 3 Pull Starter.
Specifications

Spacing between bolts holes: 2-5/8'' / 67mm
Diagonal bolt hole spacing: 3-3/4'' / 95mm

Black plastic pull starter for 47cc 2-stroke engine.
Comes with plastic starter pawl installed.

Metal pull starter for 47cc 2-stroke engine.
Comes with metal starter pawl installed.

This electric starter assembly fits most Chinese made 43cc and 43cc 2-stroke engines.
Includes spacer.

Specifications

Spacing between bolts holes: 2-5/8'' / 67mm

This is an exhaust pipe for a super pocket bike.
NOTE: This is the stock pipe.

This is an exhaust pipe for a 47cc pocket bike.
NOTE: This is the stock pipe.

Exhaust Gasket for 43cc and 49cc 2-stroke engines. Mounts between exhaust and engine.

Specifications

Bolt hole spacing: 40mm

This is a throttle cable for a super pocket bike.
Cable length is approximately 25 to 27 inches long.
This cable fits all X1, X2, .. and CatEye Pocket Bikes.

This starter claw / pawl fits most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Bolt Hole: 8mm
Overall Length: 64mm
Overall Width: 46mm

This is a starter claw / pawl for the Type 3 Pull Starter.
Click here for Type 3 Pull Starter

Specifications

Diameter: 38 mm

These clutch pads fit most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Diameter: 75.5mm
Bolt hole spacing: 54mm

This is the clutch pads and springs for a 47cc mini pocket bike or mini quad.

Specifications

Outer Diameter: 75.7 mm
Inner Diameter: 11.8 mm

This transmission fits most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Inner clutch bell diameter: 77.5mm

This is a 6 tooth gear box for a 47cc mini pocket bike or mini quad.

Specifications

Clutch Inner Diameter: 78mm

This is a 7 tooth gear box for a 47cc mini pocket bike or mini quad.

Specifications

Clutch Inner Diameter: 78mm

6 Tooth Gear Box fits all 47cc / 49cc Mini Pocket Bikes.
Provides improved strength for the front pinion.

Specifications

Bolt Hole Spacing: 71mm / 2.8''
Bell Housing: 77mm / 3.1''

This is a 6 tooth pinion gear for a 47cc, 49cc Mini Pocket Bike or Mini Quad.

Pinion Gear has M8 threads.

This is a 7 tooth pinion gear for a 47cc, 49cc Mini Pocket Bike or Mini Quad.

Pinion Gear has M8 threads.

This is a 8 tooth pinion gear for a 47cc, 49cc Mini Pocket Bike or Mini Quad.

Pinion Gear has M8 threads.

This is a 9 tooth pinion gear for a 47cc, 49cc Mini Pocket Bike or Mini Quad.

Pinion Gear has M8 threads.

This tool removed all 6, 7, 8, 9 and 10 tooth pinion gears with ease.