12 Volt / 4.5 Amp Hour 10 Hour Rated Battery
Battery has standard F1 terminals (1/4'' terminals)

Dimensions

Length: 90mm / 3-1/2''
Width: 70mm / 2-3/4''
Height: 101mm / 4''
Total Height (with terminals): 107mm / 4-1/4''
Weight: Approx. 1.72 kgs (3.8 lbs)

12 Volt / 9 Amp Hour / 20 Hour Rated battery
Battery has standard F1 terminals (1/4'' terminals)

Dimensions

Length: 151mm / 6''
Width: 65mm / 2-1/2''
Height: 94mm / 3-3/4''
Total Height (with terminals): 101mm / 4''
Weight: Approx. 2.35 kgs (5.18 lbs)

12 Volt / 18 Amp Hour / 3 Hour Rated Battery
Battery has standard F3 terminals (1/2'' terminals)

Dimensions

Length: 181mm / 7-1/8''
Width: 76mm / 3''
Height: 168mm / 6-5/8''
Total Height (with terminals): 168mm / 6-5/8''
Weight: Approx. 6.5 kgs (14.32 lbs)

Specifications

White key switch panel for electric and gas scooters.

Specifications

12 Volt horn with adjustable tone.
1/4 inch wide tab connectors.

This is a universal rubber charging port cover for all 2 and 3 prong INLINE charging ports.

Suitable for use on electric scooters and bikes with 30 Amp or lower rated fuses.
Fits 9/16" (15mm) hole.
Includes one 30 Amp / 250 Volt fuse.

Click here for additional fuses.

Suitable for use on electric scooters and bikes with 40 Amp or lower rated fuses.
Fits 9/16" (15mm) hole.
Includes one 40 Amp / 250 Volt fuse.

Click here for additional fuses.

Dimensions: 1-1/4" Long, 1/4" Diameter
Rating: 10 Amps, 250 Volts

Click here for fuse holders.

Dimensions: 1-1/4" Long 1/4" Diameter
Rating: 30 Amps, 250 Volts

Click here for fuse holders.

Dimensions: 1-1/4" Long 1/4" Diameter
Rating: 40 Amps, 250 Volts

Click here for fuse holders.

25 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

30 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

35 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

40 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

Specifications

12 volt turn signal relay with built-in beeper sound.
Includes wire with two push in connectors.

Specifications

24 volt turn signal relay with built-in beeper sound.
Includes wire with two push in connectors.

Specifications

36 volt turn signal relay with built-in beeper sound
Includes wire with two push in connectors.

This is a complete head light assembly for an electric scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is a handle bar cover for a gas or electric scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is a rear trunk for a gas or electric scooter.
This item includes all hardware necessary for mounting.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is the lock assembly for a rear trunk on a gas or electric scooter.

This 65 tooth sprocket is designed for use with #25 chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 140mm / 5-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This is a 68 tooth rear sprocket for a mini pocket bike.
This sprocket has a 3 bolt mounting pattern.

Dimensions

Inner Diameter:25.4mm / 1 inch

This is a 72 tooth rear sprocket for a mini pocket bike.
This sprocket has a 3 bolt mounting pattern.

Dimensions

Inner Diameter:25.4mm / 1 inch

This 80 tooth sprocket is designed for use with #25 chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 165mm / 6-1/2 inche
Inner Diameter: 54mm / 2-1/8 inches

This 44 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 115mm / 4-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This 54 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 140mm / 5-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This 63 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 165mm / 6-3/8 inches
Inner Diameter: 54mm / 2-1/8 inches

This 72 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 185mm / 7-3/8 inches
Inner Diameter: 54mm / 2-1/8 inches

Includes top and bottom bearing races and two headset bearings.

Cup Dimensions

Outer Diameter: 1-3/4'' / 44mm
Inner Diameter: 1-9/16'' / 40mm

Seat Dimensions:

Inner Diameter: 1-3/8'' / 34mm

Fits 1'' / 25.5mm outer diameter handlebar stem.

Chrome seat post clamp with retractable twist lever.

Dimensions

Inner Diameter:(when open) 1-3/16'' / 30mm
Inner Diameter:(when closed) 1-1/16'' / 28mm

This is a single pole handle bar assembly that fits most gas and electric scooters.

This is a twin pole handle bar assembly that fits most gas and electric scooters.

This is a generic seat post assembly used on smaller electric scooters with folding seat posts.

This is a scooter seat with absorber.

Axle adjuster for rear wheel of electric or gas scooter.
10mm inner diameter hole for axle.

Specifications

Chrome band brake assembly with heavy-duty brake rotor for gas and electric scooters.
Includes brake drum.

Dimensions

Rotor Dimensions
Outer Diameter: 3-1/2'' / 90mm
Inner Diameter: 1-3/8'' / 35mm

Brake Housing
Outer Diameter: 4-1/2'' / 114mm

Specifications

This is the brake cable (steel wire) for the brakes on a gas or electric scooter.

24 Volt 10 Watt head light bulb for electric scooters.

24 Volt 3 Watt clear blinker bulbs.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

24 Volt 3 Watt orange blinker bulbs.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

This twist throttle fits most Chinese made gas scooters.

Fits standard 7/8'' OD handlebars and cable is approximately 50'' long with two push-on connectors.

This is the switch assembly for headlight, turn signals, and horn with 7 wires.

Fits standard 7/8'' OD handlebars and cable is approximately 50'' long with seven push-in connectors.

This 12 volt charger has a multi-color LED indicator glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60Hz
Output Voltage: 12 Volt, 1.0 Amp
Connector: 3 Prong INLINE (female) plug

The voltage regulator is responsible for regulating the the voltage to the battery.
This keeps the battery at the proper charge, and the rectifier converts the AC current from the alternator to DC current needed to charge the battery.

This ignition coil assembly fits most 43cc and 49cc 2-stroke Chinese made engines.

Distance between the two mounting holes: 2-7/16 inches (62mm)

Key switch with 4 wires and keys.
Key removable in off position only.

This is a tail light for a gas scooter.

12 volt red tear drop shaped rear blinker with rear facing mounting bolt.
Includes power leads with push in connectors.

Dimensions: 2'' wide x 3/4'' high base with a 1-1/2'' x 1/2'' teardrop shaped

This is the foot deck for a gas scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is the rear fender for a gas scooter.
This fender does NOT include blinkers or tail lights.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is a fuel tank for a gas scooter.

This is a gas cap for a gas scooter fuel tank.

This is the front axle for a gas scooter.

This is the rear axle for a gas scooter.

9'' x 3.5'' x 4'' tube has bent metal valve stem.
Maximum recommended air pressure is 85 PSI.

9'' x 3.5'' x 4'' tire with 4-ply rating.
Tube has bent metal valve stem.
This tire and tube assembly fits all 4-1/2'' rims.
Maximum recommended air pressure is 85 PSI.

4-1/2'' aluminum front rim

Features

Accepts all 9'' x 3.5'' x 4'' tires and tubes.

Two piece split rim design.

Designed for use with the 6000Z bearings.

4-1/2'' aluminum rear rim

Features

Accepts all 9'' x 3.5'' x 4'' tires and tubes.

Dual threaded rear hub for freewheel and band brake.

Two piece split rim design.

Designed for use with the 6000Z bearings.

Replacement clutch / freewheel works on all Gas Scooters with threaded wheel hubs.

Dimensions:

Outer Diameter: 3 inches
Inner Diameter: 1-3/8 inches

These bearings fit most 4-1/'' rims on gas scooters.
Sold in pairs.

Dimensions

Inner Diameter: 0.39'' / 10 mm
Outer Diameter: 1.0'' / 26 mm

15 mm carburetor for use on 43cc and 49cc 2-stroke gas engines.

Specifications

Venturi Opening: 15mm

Bolt Hole Spacing: 31mm

Features

Low speed adjustment

Air Fuel mixture adjustment

43cc and 49cc 2-stroke intake manifold.

Specifications

Bolt Spacing Engine Side: 38mm
Bolt Spacing Carburetor Side: 31mm

Intake Gasket for 43cc and 49cc 2-stroke engines.
Mounts between carburetor and intake manifold.

Specifications

Center Hole: 16 mm
Bolt hole spacing: 31 mm

This air filter / choke lever fits most Chinese made 43cc and 49cc 2-stroke engines.

This pull starter fits all 43cc, and 49cc 2-stroke engines.

Specifications

Spacing between bolts holes: 2-5/8'' / 67mm
Diagonal bolt hole spacing: 3-3/4'' / 95mm

This GS Moon pull starter fits all 33cc, 36cc, 43cc, and 49cc 2-stroke engines.
Includes starter claw.

Specifications

Spacing between bolts holes: 2-5/8'' / 67mm
Diagonal bolt hole spacing: 3-3/4'' / 95mm

This starter solenoid fits most Chinese made scooters and ATVs ranging from 43cc 2-stroke to 250cc 4-stroke.

This electric starter assembly fits most Chinese made 43cc and 43cc 2-stroke engines.
Includes spacer.

Specifications

Spacing between bolts holes: 2-5/8'' / 67mm

This muffler fits most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Bolt hole spacing: 34mm / 1-1/4''
Width: 79mm / 3-1/4''
Length: 101mm / 4''

This is a gas scooter throttle cable.

Specifications

Length: 5.4 feet / 1.67 meters

This starter claw / pawl fits most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Bolt Hole: 8mm
Overall Length: 64mm
Overall Width: 46mm

These clutch pads fit most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Diameter: 75.5mm
Bolt hole spacing: 54mm

This transmission fits most Chinese made 43cc and 49cc 2-stroke engines.

Specifications

Inner clutch bell diameter: 77.5mm

This 20 tooth drive sprocket is designed for use with the gas scooter transmission.
Sprocket designed for use with 8mm (T8F) chain.

Specifications

Diameter: 55mm

Featuers

20 teeth
6 pinion mount

This 25 tooth drive sprocket is designed for use with the gas scooter transmission.
Sprocket designed for use with #25 chain.

Specifications

Diameter: 53mm

Featuers

25 teeth
6 pinion mount

This muffler cover fits most Chinese made 43cc and 49cc 2-stroke engines.

This bulb is commonly use on gas scooters, choppers, and pocket bikes.

Volts: 12V

Watts: 10W

Diameter: 11/16 inch (18mm)

Length: 1-3/4 inch (45mm)

12 Volt / 4.5 Amp Hour / 10 Hour Rated battery
Battery has 1/4'' tab connectors.

Dimensions

Length: 2-3/4''
Width: 3-1/2''
Height: 4''

12 Volt / 7 Amp Hour / 10 Hour Rated battery
Battery has 1/4'' tab connectors.

Dimensions

Length: 6''
Width: 3-7/8''
Height: 3-3/4''

The voltage regulator is responsible for regulating the the voltage to the battery.
This keeps the battery at the proper charge, and the rectifier converts the AC current from the alternator to DC current needed to charge the battery.

This ignition coil assembly fits most 47cc and 49cc 2-stroke Chinese made engines.

Distance between the two mounting holes: 2-1/8 inches (54mm)

This 20 tooth drive sprocket is designed for use with the gas scooter transmission.
Sprocket designed for use with 8mm (T8F) chain.

Specifications

Diameter: 55mm

Featuers

20 teeth
6 pinion mount

15 mm carburetor for use on 43cc and 49cc 2-stroke gas engines.

Specifications

Venturi Opening: 15mm

Bolt Hole Spacing: 31mm

Features

Low speed adjustment

Air Fuel mixture adjustment

Intake Gasket for 43cc and 49cc 2-stroke engines.
Mounts between carburetor and intake manifold.

Specifications

Center Hole: 16 mm
Bolt hole spacing: 31 mm

Intake Gasket for 47cc and 49cc 2-stroke engines.
Mounts between carburetor and intake manifold.

Specifications

Center Hole: 15 mm
Bolt hole spacing: 38 mm

This is a wire basket to fit on the front of a gas or electric scooter.