This is the switch assembly for headlight, turn signals, and horn with 7 wires.

Fits standard 7/8'' OD handlebars and cable is approximately 50'' long with seven push-in connectors.

This 24 volt charger has a multi-color LED indicator glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60Hz
Output Voltage: 24 Volt, 1.6 Amp
Connector: 3 Prong INLINE (female) plug

This 24 volt charger has a multi-color LED indicator glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60Hz
Output Voltage: 24 Volt, 1.6 Amp
Connector: 3-prong XLR (male) plug.

This 24 volt charger has a 2 LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 120 VAC 60 Hz
Output Voltage: 24 Volt, 5.0 Amp
Connector: 3-prong INLINE (female) plug

This 24 volt charger has a 2 multi-color LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 127 VAC 50/60 Hz
Output Voltage: 24 Volt, 5.0 Amp
Connector: 3-prong XLR (male) plug

This 36 volt charger has a multi-color LED indicator that glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60 Hz
Output Voltage: 36 Volt, 1.6 Amp
Connector: 3-prong INLINE (female) plug

This 36 volt charger has a multi-color LED indicator that glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60 Hz
Output Voltage: 36 Volt, 1.6 Amp
Connector: 3-prong XLR (male) plug

This 36 volt charger has a 2 LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 120 VAC 60 Hz
Output Voltage: 36 Volt, 4.0 Amp
Connector: 3-prong INLINE (female) plug

This 48 volt charger has a 2 multi-color LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60 Hz
Output Voltage: 48 Volt, 2.5 Amp
Connector: 3-prong INLINE (female) plug

This 48 volt charger has a 2 LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 120 VAC 60 Hz
Output Voltage: 48 Volt, 3.0 Amp
Connector: 3-prong XLR (male) plug

This 48 volt charger has a 2 multi-color LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60 Hz
Output Voltage: 48 Volt, 2.5 Amp
Connector: PC Style (female) plug

This 48 volt charger has a 2 multi-color LED indicators that glow red when charging and green when charging is complete.

NOTE:
Panterra electric scooters have their polarity reversed from what is the accepted configuration.
This battery charger is designed for Panterra scooters ONLY!
This battery charger will NOT work on a non-Panterra scooter.

Input Voltage: 90 - 120 VAC 50/60 Hz
Output Voltage: 48 Volt, 2.5 Amp
Connector: PC Style (female) plug

This 60 volt charger has a 2 LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 120 VAC 60 Hz
Output Voltage: 60 Volt, 3.0 Amp
Connector: INLINE (female) plug

This 60 volt charger has a 2 LED indicators that glow red when charging and green when charging is complete.

Input Voltage: 100 - 120 VAC 60 Hz
Output Voltage: 60 Volt, 3.0 Amp
Connector: PC Style (female) plug

This 24 volt controller has 6 connections.
Includes: Charging port and ON/OFF Switch.

Rated Voltage 24 Volts.

Max Current 12 Amps.

Usable Motors: &le 180 Watts.

Click here to view CT-823K Product Specifications.

This 24 volt controller has 6 connectors.

Rated Voltage 24 Volts.

Max Current 20 Amps ± 1 Amp.

Usable Motors: &le 250 Watts.

Click here to view YK71 Product Specifications.

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 21 ± 1 Amp.

Usable Motors: &le 250 Watts.

Click here to view LB27 Product Specifications.

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 500 Watts.

Click here to view LBD14 Product Specifications.

This 24 volt controller with 5 pin throttle is used on Schwinn, IZIP, and Mongoose electric scooters.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 600 Watts.

Click here to view XK-022C Product Specifications.

This 24 volt controller with 6 pin throttle is used on Schwinn, IZIP, and Mongoose electric scooters.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 600 Watts.

Click here to view XK-022E Product Specifications.

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 500 Watts

NOTE: Also known as Model L2424D.

Click here to view JC116 (24 Volt) Product Specifications

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 500 Watts

Click here to view T2430 Product Specifications

This 24 volt controller has 5 connectors.

Rated Voltage 24 Volts.

Max Current 29 Amps.

Usable Motors: &le 350 Watts.

Click here to view CT-201C6 Product Specifications.

This 24 volt controller has 5 connectors.

Rated Voltage 24 Volts.

Max Current 29 Amps.

Usable Motors: &le 350 Watts.

Click here to view CT-201C6-3 Product Specifications.

This 24 volt controller has 5 connectors.
This controller has a 5 pin throttle connector.
This controller is also know by other model numbers such as (CT-201C6-3 -or- HB2430TYD-FS).

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 350 Watts.

Click here to view HB2430-TYD-HCH Product Specifications.

This 24 volt controller has 7 connectors.

Rated Voltage 24 Volts.

Max Current 29 Amps.

Usable Motors: &le 350 Watts.

Click here to view CT-301A9 Product Specifications.

This 24 volt controller has 7 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: &le 350 Watts.

Click here to view CT-302S9 Product Specifications.

This 24 volt controller has 7 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: 250 to 350 Watts.

Click here to view CT-811B9 Product Specifications.

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: 160 to 300 Watts.

Download product specification LB33A.pdf

This 24 volt controller has 3 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Usable Motors: Up to 500 Watts.

Click Click here to view YK42-2 Product Specification

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 30 Amps.

Useable Motors: &le 500 Watts

Controller has build in Reverse function.

Click here to view YK48-2 Product Specifications

This 24 volt controller has 8 connectors.

Rated Voltage 24 Volts.

Max Current 31 Amps.

Usable Motors: &le 500 Watts.

Click here to view YK40-2 Product Specifications

This 36 volt controller has 6 connectors.

Rated Voltage 36 Volts.

Max Current 25 Amps.

Usable Motors: Up to 500 Watts.

Click here to view CT-611B9 Product Specifications

This 36 volt controller has 6 connectors.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: Up to 650 Watts.

Click here to view CT-312C1 Product Specifications

This 36 volt controller has 6 connectors.
This controller has a 5 pin throttle connector.
Controller may come with model number CT-312C1-3, HB3650TYD-FS, or CT-612C1-3. All model numbers are interchangeable.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: &le 650 Watts.

Click here to view HB3650-TYD-HCH Product Specifications.

This 36 volt controller has 8 connectors.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: 2&le 500 Watts

NOTE: Also known as Model L3618D.

Click here to view JC116 (36 Volt) Product Specifications

This 36 volt controller has 8 connectors.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: &le 500 Watts

Click here to view T3630 Product Specifications

This 36 volt controller with 5 pin throttle is used on Schwinn, IZIP, and Mongoose electric scooters.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: &le 1000 Watts.

Click here to view XK-022D Product Specifications.

This 36 volt controller with 6 pin throttle is used on Schwinn, IZIP, and Mongoose electric scooters.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: &le 1000 Watts.

Click here to view XK-022D Product Specifications.

This 36 volt controller has 8 connectors.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Usable Motors: &le 500 Watts.

Click here to view YK40-3 Product Specifications

This 36 volt controller has 3 connectors.

Rated Voltage 36 Volts.

Max Current 40 Amps.

Useable Motors: &le 800 Watts

Click here to view YK42-3 Product Specifications

This 36 volt controller has 8 connectors.

Rated Voltage 36 Volts.

Max Current 30 Amps.

Useable Motors: &le 500 Watts

Controller has build in Reverse function.

Click here to view YK48-3 Product Specifications

This 36 volt controller has 7 connectors.

Rated Voltage 36 Volts.

Max Current 40 Amps.

Useable Motors: &le 1000 Watts

Click here to view CT-660B9 Product Specifications

This 48 volt controller has 8 connectors.

Rated Voltage 48 Volts.

Max Current 40 Amps.

Useable Motors: &le 1000 Watts.

Click here to view T4830 Product Specifications

This 48 volt controller has 8 connectors.

Rated Voltage 48 Volts.

Max Current 40 Amps.

Useable Motors: &le 1000 Watts.

Click here to view YK40-4 Product Specifications

This 48 volt controller has 7 connectors.

Rated Voltage 48 Volts.

Max Current 50 Amps.

Useable Motors: 800 to 1500 Watts.

Click here to view LB37 Product Specifications

This 48 volt controller has 3 connectors.

Rated Voltage 48 Volts.

Max Current 40 - 100 Amps.

Useable Motors: &le 1000 Watts

Click here to view YK42-4 Product Specifications

This 48 volt controller has 2 connectors.
NOTE: This controller is a shorter version of the same YK42-4 controller.

Rated Voltage 48 Volts.

Max Current 40 - 100 Amps.

Useable Motors: &le 1000 Watts

Click here to view YK42-4-S Product Specifications

This 24 to 60 volt controller has 3 connectors.

This controller package includes a twist grip throttle wired to fit the controller and a matching hand grip.

Rated Voltage 24 to 36 Volts Usable Motor &le 700 Watts.

Rated Voltage 48 to 60 Volts Usable Motor &le 1000 Watts

Click here to view YK43B Product Specifications

This 48 to 60 volt controller has 3 connectors.

This controller package includes a twist grip throttle wired to fit the controller and a matching hand grip.

Rated Voltage 48 to 60 Volts.

Useable Motors: &le 2000 Watts

Click here to view ZY-KK70 Product Specifications

This 60 volt controller has 3 connectors.

This controller package includes a twist grip throttle wired to fit the controller and a matching hand grip.

Rated Voltage 60 Volts.

Max Current 60 - 100 Amps.

Useable Motors: &le 1000 Watts

Click here to view HK-60 Product Specifications

12 Volt / 4.5 Amp Hour 10 Hour Rated Battery
Battery has standard F1 terminals (1/4'' terminals)

Dimensions

Length: 90mm / 3-1/2''
Width: 70mm / 2-3/4''
Height: 101mm / 4''
Total Height (with terminals): 107mm / 4-1/4''
Weight: Approx. 1.72 kgs (3.8 lbs)

12 Volt / 9 Amp Hour / 20 Hour Rated battery
Battery has standard F1 terminals (1/4'' terminals)

Dimensions

Length: 151mm / 6''
Width: 65mm / 2-1/2''
Height: 94mm / 3-3/4''
Total Height (with terminals): 101mm / 4''
Weight: Approx. 2.35 kgs (5.18 lbs)

12 Volt / 12 Amp Hour / 20 Hour Rated Battery
Battery has standard F1 terminals (1/4'' terminals)

Dimensions

Length: 151mm / 6''
Width: 99mm / 3-7/8''
Height: 94mm / 3-3/4''
Total Height (with terminals): 101mm / 4''
Weight: Approx. 4.25 kgs (9.37 lbs)

12 Volt / 18 Amp Hour / 3 Hour Rated Battery
Battery has standard F3 terminals (1/2'' terminals)

Dimensions

Length: 181mm / 7-1/8''
Width: 76mm / 3''
Height: 168mm / 6-5/8''
Total Height (with terminals): 168mm / 6-5/8''
Weight: Approx. 6.5 kgs (14.32 lbs)

Specifications

2 Wire Ignition Switch with 2 keys.

NOTE: Key removable in off position only.

Specifications

3 Wire Ignition Switch with 2 keys.

NOTE: Key removable in off position only.

Specifications

4 Wire Ignition Switch with 2 keys.

NOTE: Key removable in off position only.

Specifications

5 Wire Ignition Switch with 2 keys.

NOTE: Key removable in off position only.

Specifications

White key switch panel for electric and gas scooters.

Specifications

12 Volt horn with adjustable tone.
1/4 inch wide tab connectors.

Specifications

24 volt horn with adjustable tone.
1/4 inch wide tab connectors.

Specifications

36 volt horn with adjustable tone.
1/4" wide tab connectors.

3 pin INLINE charger port with 10 inches of wire attached.

This is a universal rubber charging port cover for all 2 and 3 prong INLINE charging ports.

3 pin metal XLR charger port with 8 inches of wire and modular connector.
This port is made of solid metal with a metal push button release.

Dimensions: 1" Wide x 1-1/4" Tall.

PC Style charging port with 3 pins and 10 inches of wire with modular connector.

Includes charging port cover as shown in picture.

3 pin INLINE battery charger plug with solder connections.

3 pin XLR battery charger plug with solder connections.

Suitable for use on electric scooters and bikes with 30 Amp or lower rated fuses.
Fits 9/16" (15mm) hole.
Includes one 30 Amp / 250 Volt fuse.

Click here for additional fuses.

Suitable for use on electric scooters and bikes with 40 Amp or lower rated fuses.
Fits 9/16" (15mm) hole.
Includes one 40 Amp / 250 Volt fuse.

Click here for additional fuses.

Dimensions: 1-1/4" Long, 1/4" Diameter
Rating: 10 Amps, 250 Volts

Click here for fuse holders.

Dimensions: 1-1/4" Long 1/4" Diameter
Rating: 30 Amps, 250 Volts

Click here for fuse holders.

Dimensions: 1-1/4" Long 1/4" Diameter
Rating: 40 Amps, 250 Volts

Click here for fuse holders.

25 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

30 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

35 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

40 Amp DC Circuit Breaker.
Button pops out when circuit breaker is tripped.
Push button in to reset circuit breaker.
Includes mounting hardware.

Specifications

• Two 1/4'' tab terminals on back side of circuit breaker.
• Fits 7/16'' diameter hole.

Dimensions: 2-1/4'' x 1-3/8'' x 9/16'' (L x W x H)

Specifications

12 volt turn signal relay with built-in beeper sound.
Includes wire with two push in connectors.

Specifications

24 volt turn signal relay with built-in beeper sound.
Includes wire with two push in connectors.

Specifications

36 volt turn signal relay with built-in beeper sound
Includes wire with two push in connectors.

24 volt red tear drop shaped rear blinker with rear facing mounting bolt.
Includes power leads with push in connectors.

Dimensions: 2" wide x 3/4" high base with a 1-1/2" x 1/2" teardrop shaped

36 volt red tear drop shaped rear blinker with rear facing mounting bolt.
Includes power leads with push in connectors.

Dimensions: 2" wide x 3/4" high base with a 1-1/2" x 1/2" teardrop shaped

24 volt brake light with rear facing mounting bolt.
Includes power leads with push on connectors.

36 volt brake light with rear facing mounting bolt.
Includes power leads with push on connectors.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Includes both male and female plastic connectors and metal pins.

Connector Crimping Tool is used to join and connect wiring terminals and pins.

This is a complete head light assembly for an electric scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is a handle bar cover for a gas or electric scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

Key lock assembly used on the access panels of some electric scooters.

This is a scooter body for an electric scooter. This body has an access panel with key lock.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

Call to check color availability (901) 734-4207

This is a large scooter body for an electric scooter.
This body has an access panel with key lock.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is a rear trunk for a gas or electric scooter.
This item includes all hardware necessary for mounting.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is the lock assembly for a rear trunk on a gas or electric scooter.

Axle includes, center spacer, two outer spacers, and two nylon lock nuts.
Axle is designed for use with 6001Z bearings.

Dimensions:

• Axle Length: 5-3/4 in. (146mm)
• Axle Diameter: 15/32 in. (12mm)
• Axle Thread Area: 3/4 in. (19mm)

Click here for 6001Z bearings.

Axle includes, center spacer, two outer spacers, brake spacer, and two nylon lock nuts.
Axle is designed for use with 6001Z bearings.

Dimensions:

• Axle Length: 6-5/8 in. (168mm)
• Axle Diameter: 15/32 in. (12mm)
• Axle Thread Area: 3/4 in. (19mm)

Click here for 6001Z bearings.

200mm x 50mm (8'' x 2'') tire with 4-ply rating.
Tube has bent metal valve stem.
This tire and tube assembly fits all 4-1/4'' rims.
Maximum recommended air pressure is 85 PSI.

200mm x 50mm (8'' x 2'') tube has bent metal valve stem.
Maximum recommended air pressure is 85 PSI.

This 12-1/2'' X 2-1/4'' tire and tube fit all 8-1/2'' rims and are interchangeable with all 12-1/2'' x 2-1/2'' tires and tubes.
Maximum recommended air pressure is 40 PSI.

This 12-1/2'' x 2-1/4'' tube fits all 8-1/2'' rims.
Recommended tire size: 12-1/2'' x 2-1/4''.
Maximum recommended air pressure is 40 PSI.

This 12-1/2'' x 2-1/2'' tire and tube fit all 8-1/2'' rims and are interchangeable with all 12-1/2'' x 2-1/4'' tires and tubes.
Maximum recommended air pressure is 40 PSI.

This 12-1/2'' x 2-1/2'' tube fits all 8-1/2'' rims.
Recommended tire size: 12-1/2'' x 2-1/2''.
Maximum recommended air pressure is 40 PSI.

This 12-1/2'' x 3.0'' tire and tube fits all 8-1/2'' rims.

This 12-1/2'' x 3.0'' tube fits all 8-1/2'' rims.
This tube has a straight valve stem.
Recommended tire size: 12-1/2'' x 3.0''.

This 12-1/2'' x 3.0'' tire and tube fits all 8-1/2'' rims.
Maximum recommended air pressure is 35 PSI.

This 12-1/2'' x 3.0'' tube fits all 8-1/2'' rims.
This tube has an angled valve stem.
Recommended tire size: 12-1/2'' x 3.0''.

This 3.00 - 4 tire and tube fits all 4-1/4'' rims.
Includes bent valve inner tube.
Maximum recommended air pressure is 45 PSI.

3.00 - 4 (10'' x 3'') Tire and Tube with Knobby Tread Pattern
This tire and tube is commonly found on the 49cc 2-stroke mini quads.
Includes bent valve inner tube.
Maximum recommended air pressure is 36 PSI.

This tube fits all 3.00 - 4 tires.
Maximum recommended air pressure is 45 PSI.

Front rim with 3 curved spokes designed for use with all 12-1/2'' tires.

Features

Accepts all 12-1/2'' tires and tubes.

Designed for use with the 6001Z bearings.

Rear rim with 3 curved spokes designed for use with all 12-1/2'' tires.

Features

Dual threaded rear hub for freewheel and band brake.

Accepts all 12-1/2'' tires and tubes.

Designed for use with the 6001Z bearings.

Front rim with 5-spokes designed for use with all 12-1/2'' tires.
For use on Currie, Schwinn, IZIP, GT, and Mongoose electric scooters.

Features

Includes Axle, Bearings, and Nuts

Accepts all 12-1/2'' tires and tubes.

Rear rim (dual threaded) with 5-spokes designed for use with all 12-1/2'' tires.
For use on Currie, Schwinn, IZIP, GT, and Mongoose electric scooters.

Features

Dual threaded rear hub for rear sprocket and band brake.

Includes Axle, Bearings, and Nuts

Accepts all 12-1/2'' tires and tubes.

Rear rim with 5-spokes designed for use with all 12-1/2'' tires.
For use on Currie, Schwinn, IZIP, GT, and Mongoose electric scooters.

Features

Threaded on one side to accept rear sprocket.

Includes Axle, Bearings, and Nuts.

Accepts all 12-1/2'' tires and tubes.

4-1/4'' aluminum front rim

Features

Accepts all 200mm x 50mm (8'' x 2'' ) tires and tubes.

Two piece split rim design.

Designed for use with the 6200Z bearings.

4-1/4'' aluminum rear rim

Features

Accepts all 200mm x 50mm (8'' x 2'' ) tires and tubes.

Threaded rear hub for band brake drum.

Built in HTD drive belt cog works with any length of HTD 5M-15 drive belt.

Two piece split rim design.

Designed for use with the 6200Z bearings.

Replacement clutch / freewheel works on all Electric Scooters with threaded wheel hubs.

Dimensions:

• Outer Diameter: 3 inches
• Inner Diameter: 1-3/8 inches

This 16 tooth sprocket / freewheel is suited for use with 1/2'' x 1/8'' pitch bicycle chain.
Fits all 1-3/8 inch outer diameter scooter and bike threaded wheel hubs.

Dimensions:

Outer Diameter: 2-3/4 inches
Inner Diameter: 1-3/8 inches

These bearings fit most 8-1/2" front or rear rims on electric scooters.
Sold in pairs.

Dimensions:

• Inner Diameter: 12 mm / 0.47 inches
• Outer Diameter: 28 mm / 1.1 inches

This 55 tooth sprocket is designed for use with #25 chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 115mm / 4-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This 65 tooth sprocket is designed for use with #25 chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 140mm / 5-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This is a 68 tooth rear sprocket for a mini pocket bike.
This sprocket has a 3 bolt mounting pattern.

Dimensions

Inner Diameter:25.4mm / 1 inch

This is a 72 tooth rear sprocket for a mini pocket bike.
This sprocket has a 3 bolt mounting pattern.

Dimensions

Inner Diameter:25.4mm / 1 inch

This 80 tooth sprocket is designed for use with #25 chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 165mm / 6-1/2 inche
Inner Diameter: 54mm / 2-1/8 inches

This 44 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 115mm / 4-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This 54 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 140mm / 5-1/2 inches
Inner Diameter: 54mm / 2-1/8 inches

This 63 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 165mm / 6-3/8 inches
Inner Diameter: 54mm / 2-1/8 inches

This 72 tooth sprocket is designed for use with 8mm (T8F) chain and attaches directly to the rear wheel freewheel mechanism.

Dimensions

Outer Diameter: 185mm / 7-3/8 inches
Inner Diameter: 54mm / 2-1/8 inches

This fork assembly fits most 12-1/2 inch front wheel assemblies.

Includes top and bottom bearing races and two headset bearings.

Cup Dimensions

Outer Diameter: 1-3/4'' / 44mm
Inner Diameter: 1-9/16'' / 40mm

Seat Dimensions:

Inner Diameter: 1-3/8'' / 34mm

Fits 1'' / 25.5mm outer diameter handlebar stem.

Chrome seat post clamp with retractable twist lever.

Dimensions

Inner Diameter:(when open) 1-3/16'' / 30mm
Inner Diameter:(when closed) 1-1/16'' / 28mm

This is a single pole handle bar assembly that fits most gas and electric scooters.

This is a twin pole handle bar assembly that fits most gas and electric scooters.

This is a rubber seat post grommet for an electric scooter.

This is a seat post assembly for an electric scooter.

This is a seat post screw for attaching seat to scooter body.

This is a generic seat post assembly used on smaller electric scooters with folding seat posts.

This is a scooter seat with absorber.

Axle adjuster for rear wheel of electric or gas scooter.
10mm inner diameter hole for axle.

Adjustable rear shock for electric scooter.

Dimensions

Length: 4-3/4''
Width: 1-3/4''

Specifications

Black band brake assembly with heavy-duty brake rotor for gas and electric scooters.
Includes brake drum.

Dimensions

Rotor Dimensions
Outer Diameter: 2-3/8'' / 60mm
Inner Diameter: 1-3/8'' / 35mm

Brake Housing
Outer Diameter: 3-1/8'' / 79mm

Specifications

Black band brake assembly with heavy-duty brake rotor for gas and electric scooters.
Includes brake drum.

Dimensions

Rotor Dimensions
Outer Diameter: 2-3/4'' / 70mm
Inner Diameter: 1-3/8'' / 35mm

Brake Housing
Outer Diameter: 3-1/2'' / 89mm

Specifications

Chrome band brake assembly with heavy-duty brake rotor for gas and electric scooters.
Includes brake drum.

Dimensions

Rotor Dimensions
Outer Diameter: 3-1/2'' / 90mm
Inner Diameter: 1-3/8'' / 35mm

Brake Housing
Outer Diameter: 4-1/2'' / 114mm

This disk brake caliper fits many gas, electric scooters and pocket bikes.

Adjustment knob for proper disk alignment.

Designed for use with 120mm, 140mm and 160mm disk brake rotors.

This disk brake caliper fits many gas scooters, electric scooters and pocket bikes models.

Adjustment knob for proper disk alignment.

Designed for use with 120mm, 140mm and 160mm disk brake rotors.

Set of two disc brake pads.
Pads measures approximately 1-1/8'' x 3/4''.

120mm disk brake rotor with 3 hole mounting pattern.
Direction indicator arrow on surface of rotor.

Specifications

Outer Diameter: 120mm
Inner Diameter: 26mm
Thickness: 3mm
Bolt hole spacing: 33mm

Specifications

This is the brake cable (steel wire) for the brakes on a gas or electric scooter.

Specifications

This is a #25 master link.

#25 chain has a 1/4'' spacing between each link and is approximately 1/4'' wide.

Specifications

Chain is 15-1/2'' long.

#25 chain has a 1/4'' spacing between each link and is approximately 1/4'' wide.

Specifications

Chain is 17-1/2'' long.

#25 chain has a 1/4'' spacing between each link and is approximately 1/4'' wide.

Specifications

#25 chain sold by the foot.
Includes one #25 master link.

#25 chain has a 1/4 inch spacing between each link and is approximately 1/4 inch wide.

Specifications

This tool breaks all #25 and 8mm (T8F) chains.
The chain breaker does not actually "break" the chain, it just removes the pins that hold the chain together. Once the pins have been removed the chain can be taken apart.

Specifications

8mm (T8F) Master Link

Dimensions

Pin Spacing: 8mm / 5/16 inch
Width Between Rollers: 0.128 inches

Specifications

Chain is 13'' long folded in half.
8mm chain has a 5/16'' spacing between each link.

Specifications

8mm (T8F) chain sold by the foot.
Includes one 8mm (T8F) master link.

8mm (T8F) chain has a 5/16 inch spacing between each link.

Specifications

410 Master Link 1/2 x 1/8 inch
This master link is for single speed bicycle chain.

Dimensions

Pin Spacing: 9.4mm / 0.37 inchs

Specifications

410 chain sold by the foot.
Includes one 410 master link.

410 Chain (1/2 x 1/8 inch) is also know as single speed bicycle chain.

Specifications

420 Master Link

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 7.7mm / 0.30 inches

Specifications

Chain is 22-1/2 inches long folded in half.
Includes one master link.

420 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 7.7mm / 0.30 inches

Specifications

This tool breaks all 420 and 428 chains.
The chain breaker does not actually "break" the chain, it just removes the pins that hold the chain together. Once the pins have been removed the chain can be taken apart.

Specifications

428 Master Link

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 16 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 17.5 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 8.5mm / 0.335 inches

Specifications

Chain is 24 inches long folded in half.
Includes one master link.

428 chain has a 1/2 inch spacing between each link.

Dimensions

Pin Spacing: 12.7mm / 1/2 inch

Specifications

428 chain sold by the foot.
Includes one 428 master link.

428 chain has a 1/2 inch spacing between each link.

Drive belts are measured by three dimensions and are usually marked like this:

HTD535-5m-15

where each of these dimensions indicate the following.

Length: 21'' / 535mm
Tooth Spacing: 0.197'' / 5mm
Width: 0.59'' / 15mm

This 11 tooth sprocket fits most MY1016 style electric scooter motors.
This sprocket is designed for use with #25 chain.

Dimensions

Outer Diameter: 1.0'' / 25mm
Inner Diameter: 0.315'' / 8mm

This 11 tooth sprocket fits most MY1020 style electric scooter motors.
This sprocket is designed for use with #25 chain.

Dimensions

Outer Diameter: 1.0'' / 25mm
Inner Diameter: 0.393'' / 10mm

This 13 tooth sprocket fits most MY1020 style electric scooter motors.
This sprocket is designed for use with #25 chain.

Dimensions

Outer Diameter: 1-1/2'' / 38mm
Inner Diameter: 0.393'' / 10mm

This 10 tooth sprocket fits most MY1020 style electric scooter motors.
This sprocket is designed for use with 8mm (T8F) chain.

Dimensions

Outer Diameter: 1.0'' / 25mm
Inner Diameter: 0.393'' / 10mm

This 13 tooth sprocket fits most MY1020 style electric scooter motors.
This sprocket is designed for use with 8mm (T8F) chain.

Dimensions

Outer Diameter: 1-1/2'' / 38mm
Inner Diameter: 0.393'' / 10mm

This 13 tooth 5mm belt sprocket fits most MY1016 style electric scooter motors.
This sprocket is designed for use with any 5mm belts.

Dimensions

Outer Diameter: 1.0'' / 25mm
Inner Diameter: 0.315'' / 8mm

This 11 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors.
Includes retention pin.

Dimensions

Outer Diameter: 1.0'' / 25mm
Inner Diameter: 3/8'' / 10mm

This 12 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors.
Includes retention pin.

Dimensions

Outer Diameter: 1-1/16'' / 27mm
Inner Diameter: 3/8'' / 10mm

This 13 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors.
Includes retention pin.

Dimensions

Outer Diameter: 1-3/16'' / 30mm
Inner Diameter: 3/8'' / 10mm

This 14 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors.
Includes retention pin.

Dimensions

Outer Diameter: 1-1/4'' / 31mm
Inner Diameter: 3/8'' / 10mm

This 15 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors.
Includes retention pin.

Dimensions

Outer Diameter: 1-5/16'' / 33mm
Inner Diameter: 3/8'' / 10mm

This 15 tooth freewheel sprocket fits 8mm shaft with 10mm collar and has a 3mm hole for retention pin.

Freewheel rotates freely in one direction and is fixed in the other direction.
Includes retention pin.

Dimensions

Outer Diameter: 1-5/16'' / 33mm
Inner Collar Diameter: 3/8'' / 10mm
Inner Diameter: 5/16'' / 8mm

This 9 tooth d-bore sprocket for 1/2'' x 1/8'' bicycle chain.

1/2'' x 1/8'' bicycle chain is also referred to as 410 chain.

This sprocket is designed for use with the MY1016 series of motors that have a 10mm single d-bore shaft.

Dimensions

Outer Diameter: 1-5/8'' / 41mm
Inner Diameter: 0.393'' / 10mm

This 11 tooth dual d-bore sprocket for 1/2'' x 1/8'' bicycle chain.

1/2'' x 1/8'' bicycle chain is also referred to as 410 chain.

This sprocket is designed for use with the MY1020 series of motors that have a 10mm dual d-bore shaft.

Dimensions

Outer Diameter: 1-15/16'' / 48.8mm
Inner Diameter: 0.393'' / 10mm

MY6812 24 Volt, 120 Watt Chain Drive Motor, 2300 RPM, 6.5 Amp, permanent-magnet motor.

9 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Motor Dimensions: 2-5/8" wide x 3-7/8" long excluding shaft, 4-7/8" long including shaft.

MY1016-BD 24 Volt, 250 Watt Belt Drive Motor, 2650 RPM, 13.7 Amp, permanent-magnet motor.

13 tooth 5mm belt sprocket.

12 gauge power leads with standard 1/4'' push-in connectors.

Mounting bracket measures 4-1/2'' x 2-1/8'' with 4 threaded mounting holes.

MY1016 24 Volt, 250 Watt, 2650 RPM, 13.7 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Mounting bracket measures 4-1/2'' x 2-1/8'' with 4 threaded mounting holes.

MY1018Z 24 Volt, 250 Watt, 2750 RPM, 13.3 Amp, permanent-magnet motor.

9 tooth sprocket for 1/2'' x 1/8'' pitch chain.

12 gauge power leads

Gear Ratio: 79:11 (7.182)

MY1016 24 Volt, 350 Watt, 2650 RPM, 19.2 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Mounting bracket measures 4-1/2'' x 2-1/8'' with 4 threaded mounting holes.

MY1016Z3 24 Volt, 350 Watt, 3000 RPM, 18.7 Amp, permanent-magnet motor.

9 tooth sprocket for 1/2'' x 1/8'' pitch chain.

12 gauge power leads.

Gear Ratio: 88:9 (9.778)

XYD-6B 24 Volt, 450 Watt, 2300 RPM, 28.0 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads

3 bolt mounting bracket measures 3-7/8'' center to center distance between holes

Motor Dimensions: 4'' H x 4'' W x 5-1/4'' L including shaft.

MY1018Z 24 Volt, 450 Watt, 3000 RPM, 24.0 Amp, permanent-magnet motor.

9 tooth sprocket for 1/2'' x 1/8'' pitch chain.

12 gauge power leads

Gear Ratio: 79:11 (7.182)

MY1020 24 Volt, 500 Watt, 2500 RPM, 27.4 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads

Motor Dimensions: 4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including shaft.

MY1020-B 24 Volt, 500 Watt, 2500 RPM, 27.4 Amp, permanent-magnet motor with mounting bracket.

11 tooth sprocket for #25 chain.

12 gauge power leads

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

Motor Dimensions: 4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including shaft.

XYD-13 24 Volt, 600 Watt, 2600 RPM, 36.0 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads

3 bolt mounting bracket measures 3-7/8'' center to center distance between holes

Motor Dimensions: 4'' H x 4'' W x 5-1/4'' L including shaft.

MY9716 24 Volt, 800 Watt, 5200 RPM, 45.6 Amp, Transaxle with Electronic Brake.

12 gauge power leads with standard 1/4" push-in connectors.

Gear Ratio: 20:1

Dimensions

• Body Diameter: 5.7 in. / 145mm
• Shaft Diameter: 0.47 in. / 12mm
• Shaft Length: 2.87 in. / 73mm
• Body Length: 15.98 in. / 406mm
• Overall Height: 7.55 in. / 192mm
• Overall Length: 23.81 in. / 605mm

MY1018Z 36 Volt, 250 Watt, 2750 RPM, 8.9 Amp, permanent-magnet motor.

9 tooth sprocket for 1/2 inch pitch chain.

12 gauge power leads.

Gear Ratio: 79:11 (7.182)

MY1016 36 Volt, 350 Watt, 2500 RPM, 11.5 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Mounting bracket measures 4-1/2'' x 2-1/8'' with 4 threaded mounting holes.

XYD-6B1 36 Volt, 450 Watt, 2300 RPM, 28.0 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads

3 bolt mounting bracket measures 3-7/8'' center to center distance between holes

Motor Dimensions: 4'' H x 4'' W x 5-1/4'' L including shaft.

MY1018Z 36 Volt, 450 Watt, 3000 RPM, 16.0 Amp, permanent-magnet motor.

9 tooth sprocket for 1/2'' x 1/8'' pitch chain.

12 gauge power leads

Gear Ratio: 79:11 (7.182)

MY1020 36 Volt, 500 Watt, 2500 RPM, 18.3 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Motor Dimensions: 4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including shaft.

XYD-13A 36 Volt, 600 Watt, 2600 RPM, 36.0 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads

3 bolt mounting bracket measures 3-7/8'' center to center distance between holes

Motor Dimensions: 4'' H x 4'' W x 5-1/4'' L including shaft.

MY1020Z3 36 Volt, 600 Watt, 3300 RPM Non-Gear Reduced / 480 RPM Gear Reduced, 21.3 Amp, permanent-magnet motor.

10 tooth sprocket for #420 chains.

12 gauge power leads.

Gear Ratio: 60:9 (6.67)

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

MY1020ZX 36 Volt, 600 Watt, 550 RPM Gear Reduced, 21.3 Amp, permanent-magnet motor.

10 tooth sprocket for #420 chains.

12 gauge power leads.

Gear Ratio: 60:9 (6.67)

Fan Cooled Motor
Mounting bracket measures 5-1/2'' W x 4-1/2'' L with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

MY1020 36 Volt, 750 Watt, 2800 RPM, 27.4 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Motor Dimensions: 4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including shaft.

MY1020-B 36 Volt, 750 Watt, 2800 RPM, 27.4 Amp, permanent-magnet motor.

11 tooth sprocket for #25 chain.

12 gauge power leads with standard 1/4'' push-in connectors.

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

Motor Dimensions: 4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including shaft.

MY8922 36 Volt, 800 Watt, 3000 RPM, 28.5 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain.

12 gauge power leads

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Motor Dimensions: 3-1/2'' W x 5-3/4'' L not including shaft. 3-1/2'' W x 6-3/4'' L including shaft.

MY1020 36 Volt, 1000 Watt, 3000 RPM, 35.6 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

MY1020-B 36 Volt, 1000 Watt, 3000 RPM, 35.6 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

MY1020 48 Volt, 1000 Watt, 3000 RPM, 27.6 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

MY1020-B 48 Volt, 1000 Watt, 3000 RPM, 27.6 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes.

Mounting holes 4'' center to center across and 2-1/4'' center to center across.

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

MY1020 60 Volt, 1000 Watt, 3000 RPM, 19.4 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

MY1020-B 60 Volt, 1000 Watt, 3000 RPM, 19.4 Amp, permanent-magnet motor.

11 tooth sprocket for 8mm (T8F) chain

12 gauge power leads

Mounting bracket measures 4-1/2'' x 2-1/8'' with 4 threaded mounting holes.

Motor Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft.

These are the screws used to mount most electric scooter motors.

24 Volt 10 Watt head light bulb for electric scooters.

24 Volt 3 Watt clear blinker bulbs.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

24 Volt 3 Watt orange blinker bulbs.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

40 Volt (36 Volt) 10 Watt head light bulb for electric scooters.
For use on 36 Volt electric scooters.

40 Volt (36 Volt) 3 Watt clear blinker bulbs.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

40 Volt (36 Volt) 3 Watt orange blinker bulbs.
For use on 36 Volt electric scooters.
Bulbs sold in pairs.

Specifications

Diameter: 13/32'' / 10mm
Length: 1'' / 25mm
Bulb Shape: T-3 1/4
Base: Wedge

This twist throttle fits most Chinese made gas scooters.

Fits standard 7/8'' OD handlebars and cable is approximately 50'' long with two push-on connectors.

This is the switch assembly for headlight, turn signals, and horn with 7 wires.

Fits standard 7/8'' OD handlebars and cable is approximately 50'' long with seven push-in connectors.

This 12 volt charger has a multi-color LED indicator glows red when charging and green when charging is complete.

Input Voltage: 90 - 120 VAC 50/60Hz
Output Voltage: 12 Volt, 1.0 Amp
Connector: 3 Prong INLINE (female) plug

The voltage regulator is responsible for regulating the the voltage to the battery.
This keeps the battery at the proper charge, and the rectifier converts the AC current from the alternator to DC current needed to charge the battery.

This ignition coil assembly fits most 43cc and 49cc 2-stroke Chinese made engines.

Distance between the two mounting holes: 2-7/16 inches (62mm)

Key switch with 4 wires and keys.
Key removable in off position only.

This is a tail light for a gas scooter.

This is a 12 volt tail / brake light for a gas scooter.

12 volt red tear drop shaped rear blinker with rear facing mounting bolt.
Includes power leads with push in connectors.

Dimensions: 2'' wide x 3/4'' high base with a 1-1/2'' x 1/2'' teardrop shaped

This is the foot deck for a gas scooter.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com

This is the rear fender for a gas scooter.
This fender does NOT include blinkers or tail lights.

Colors Available

RED

BLUE

BLACK

SILVER

YELLOW

GREEN

PURPLE

To check color availability call (901) 734-4207
-OR-
e-mail us at sales@tncscooters.com